The calibration block is a 4”x12”x.025” rubber lining glued on a conductive plate. A pinhole is created on the rubber lining and when the high voltage passes over the pinhole it arcs through to the conductive material.
Model Introduction: The BD-10AST is one of our tank lining tester kit which includes the BD-10AS and 3 electrodes (12101, 12131 and 12141). The BD-10AS Generates a spark at a high voltage and...
Model Introduction: Generates a spark at a high voltage and frequency, used to detect pinholes and vacuum leaks. Designed for heavy duty use, with a metal power control unit source which separates...
Model Introduction: Our top of the line model features an auto-sensing design, to test a wide range of materials from thin coatings of thickness from thousands on an inch to linings as thick as...
This is a bundle including the BD-10AST Tank Lining Tester Kit, and a Peak Voltage Calibrator (12701)
This bundle is our Solid State BD-40E Tester (14001) combined with two of our most popular accessory electrodes the Fan Brush (12141) and the 12" T-Tip (12131) at discounted pricing. An...
Model Introduction: The BD-10AST is one of our tank lining tester kit which includes the BD-10AS an…
Model Introduction: Generates a spark at a high voltage and frequency, used to detect pinholes and v…
Model Introduction: Our top of the line model features an auto-sensing design, to test a wide range …
This is a bundle including the BD-10AST Tank Lining Tester Kit, and a Peak Voltage Calibrator (12701…
This bundle is our Solid State BD-40E Tester (14001) combined with two of our most popular accessory…
4 in. wide for testing curved and straight lining and other surfaces.
8 in. wide for testing curved and flat surfaces. Hinged for hard to reach areas.
Model Introduction: Generates a spark at a high voltage and frequency, used to detect pinholes and …
Point Electrode Tip used for testing recesses or small areas. Not for use with BD-20A or BD-20AC.